G9 System FACTOR

This system ensures clean, safe water, free from issues such as hardness or microbiological contamination.

It is recommended for improving water quality, which may suffer from issues such as sediment presence and excessive hardness, as well as microbiological contamination that lab tests indicate as containing a relatively low number of pathogenic microorganisms.

In certain cases, even tap water may require additional treatment to eliminate hardness or ensure complete protection against microorganisms. However, this treatment is most often necessary in rural areas or locations where water quality is inconsistent.

Sediment Filter: Removes mechanical sediments like sand, clay, rust, etc.

Features two filtration stages: the first for sediments of 70-100 μm and the second for sediments up to 40 μm.

The filter’s rotating system prevents algae formation and proliferation.

The filter is made from BPA-free materials.

G9 Radian Essential Water Softener:

Removes calcium and magnesium salts responsible for water hardness through an ion exchange process.

Hard water passes through a resin-containing reservoir, where calcium and magnesium ions are exchanged with sodium ions originally present on the resin surface.

When the resin's ion exchange capacity is exhausted, it must be regenerated using 99.9% purity salt tablets to prepare it for a new operating cycle.

The device is non-electric, eliminating electricity consumption.

UV Lamp:

Connected to a power source, it emits ultraviolet radiation (UV) through a stainless steel casing that the water flows through, effectively destroying microorganisms.

The steel casing protects both the lamp and the users while ensuring controlled water flow for effective disinfection.

G9 Vector Plus Reverse Osmosis System:

Installed at the point of use in the kitchen, under the sink.

Equipped with a remineralization filter to ensure the water is perfect for consumption.

After remineralization, the water passes through a UF filter for ultrafiltration as the final stage of microbiological protection before consumption. This step eliminates any microorganisms that might appear in the water between the UV lamp and the tap.